Hush Panel Premier 52 Acoustic Floor Board 2400 x 600 x 52mm

Bring floor levels up and everyday noise down with Hush Panel Premier 52. This acoustic floor board combines a stiff chipboard surface with a thick resilient underside, helping reduce both footsteps and airborne noise such as voices and TV.

Each 2400 x 600 x 52mm board covers 1.44m² and provides a finished floor height of 52mm over a concrete or timber deck. Hush Panel Premier 52 is ideal for raising floor levels in changes of use and refurbishment projects, including where pre-completion testing is required.

	Impact rating: 51 dB L’nT,w
	Airborne rating: 63 dB DnT,w / 55 dB DnT,w + Ctr
	Thickness: 52mm
	Board size: 2400 x 600mm
	Area: 1.44m² per board

Two layers, one time-saving installation

Hush Panel Premier 52 combines 22mm high-density P5 moisture-resistant TG4 chipboard with a 30mm HushSlab 30 acoustic resilient layer factory-bonded to the underside. The bonded layers install in a single operation, while the resilient layer takes up minor undulations in the floor surface.

Acoustic performance

Typical performance is 51 dB L’nT,w for impact sound, 63 dB DnT,w for airborne sound and 55 dB DnT,w + Ctr. Hush Panel Premier 52 helps protect rooms below from footsteps as well as airborne sound travelling through the floor.

Hush Panel Premier 52 is used in floor systems designed to meet Building Regulations Part E in England & Wales, Section 5 in Scotland and Part G in Northern Ireland.

Robust Details applications

Hush Panel Premier 52 is Robust Details FFT4 compliant for floor structures EFC-1, EFC-2 and EFS-1 over concrete and steel. It is also used in Hush-System TF (HD1029) as an alternative to the traditional FFT-1 floating floor in timber frame.

Premier 52 or Premier 48?

Hush Panel Premier 52 has a thicker 22mm chipboard top layer for extra stiffness, compared with the 18mm top layer on Hush Panel Premier 48. Premier 52 also has a higher typical airborne rating of 63 dB DnT,w, compared with 58 dB DnT,w for Premier 48. Choose the thickness that suits your required floor level and acoustic specification.

Installation and floor finishes

• Glue all tongue-and-groove joints with Hush Bond panel adhesive.
• Isolate the perimeter with Hush Seal 20, or use Hush RD Flanking Strip on Robust Details projects.
• For a tiled finish, use Permalayer and a flexible tile adhesive.

How many boards do I need?

Divide your room area in m² by 1.44, add 10% for cuts, then round up to a whole board.

For example, a 20m² room needs 20 ÷ 1.44 x 1.10 = 15.28, rounded up to 16 boards.

For help with the right quantity for your project, call our technical team on 01928 571 856 or email hello@soundinsulationstore.co.uk