WALL SOUNDPROOFING SOLUTIONS

Acoustic Wall Systems

Compare acoustic wall systems for upgrading existing walls, from compact resilient linings to deep independent constructions. Find the most appropriate approach for your wall, space and noise problem, then explore the full materials calculator on each product page.

Find your wall system Compare all five systems

Compare compact and independent wall linings
Check room depth and existing wall construction
Explore the full system and materials calculator

Acoustic soundproofing system construction illustration

Illustrative acoustic wall system build-up

Filter by lining style or system family, then compare the construction and installation requirements. These are different approaches rather than a ranking by sound reduction.

I’m looking for

System construction illustration

LOW-PROFILE CLIP LINING01

Genie Wall 80 Acoustic System

A compact acoustic wall lining for existing walls where retaining usable room space is important.

Best starting point: Domestic wall upgrades where space is restricted.
System approach: A resilient GenieClip lining with acoustic insulation and high-mass layers.
Important to check: Check the existing wall, the proposed fixing method and whether the project is a domestic upgrade.

The product describes an approximately 80mm build-up and is intended for upgrading existing domestic walls; confirm current dimensions and installation details before ordering.

View system & calculate materials

System construction illustration

INDEPENDENT DBOARD LINING02

Opti Wall 140 dBoard Acoustic System

A deep, independent wall lining using a resilient element and high-mass dBoard for projects needing a substantial separating construction.

Best starting point: Party-wall upgrades where a deeper, independent lining is practical.
System approach: Independent void, Maxi resilient bars and dBoard acoustic layers.
Important to check: Check the space available, independent framing and treatment of all wall junctions.

The existing page describes a large separation and resilient bars. Confirm the complete component schedule and support details on the product page.

View system & calculate materials

System construction illustration

DEEP INDEPENDENT SYSTEM03

Genie 150 Acoustic Wall System

A deeper acoustic wall system built around high mass and multiple stages of separation for demanding noise-control projects.

Best starting point: Projects where acoustic isolation is prioritised over preserving room depth.
System approach: Deep independent lining with multiple isolation and mass layers.
Important to check: Confirm the required wall depth, fire requirements and installation specification.

A deep lining may offer scope for stronger acoustic treatment, but performance depends on the existing wall, flanking paths and accurate installation.

View system & calculate materials

System construction illustration

INDEPENDENT WALL LINING04

Opti 120 Acoustic Wall System

A substantial independent wall system combining cavity absorption, structural separation and mass to reduce airborne noise.

Best starting point: Projects with room to create a deeper independent wall lining.
System approach: Independent framework, insulated void and substantial acoustic lining.
Important to check: Allow for the finished wall depth and confirm structural and perimeter details.

The independent approach is intended to reduce direct coupling to the existing wall. Correct floor, ceiling and flanking-wall junctions are just as important as the lining itself.

View system & calculate materials

System construction illustration

COMPACT MAXI SYSTEM05

Maxi 60 Acoustic Wall System

A compact acoustic wall lining from the Maxi range designed to reduce airborne sound transfer where depth is at a premium.

Best starting point: Wall upgrades where a shallower lining is preferred.
System approach: Low-profile wall lining with acoustic board and resilient separation.
Important to check: Confirm the precise build-up and whether it suits the existing wall and project requirements.

The published product is titled Maxi 60 Acoustic Wall System, despite its legacy Shopify handle containing “ceiling”. The product page is the correct destination.

View system & calculate materials

AT A GLANCE

Acoustic wall systems compared

Compare how the five wall linings are built, where they fit and what to check before choosing.

System	Best starting point	Construction approach	Check before selecting
Genie Wall 80 Acoustic System	Domestic wall upgrades where space is restricted.	A resilient GenieClip lining with acoustic insulation and high-mass layers.	Check the existing wall, the proposed fixing method and whether the project is a domestic upgrade.
Opti Wall 140 dBoard Acoustic System	Party-wall upgrades where a deeper, independent lining is practical.	Independent void, Maxi resilient bars and dBoard acoustic layers.	Check the space available, independent framing and treatment of all wall junctions.
Genie 150 Acoustic Wall System	Projects where acoustic isolation is prioritised over preserving room depth.	Deep independent lining with multiple isolation and mass layers.	Confirm the required wall depth, fire requirements and installation specification.
Opti 120 Acoustic Wall System	Projects with room to create a deeper independent wall lining.	Independent framework, insulated void and substantial acoustic lining.	Allow for the finished wall depth and confirm structural and perimeter details.
Maxi 60 Acoustic Wall System	Wall upgrades where a shallower lining is preferred.	Low-profile wall lining with acoustic board and resilient separation.	Confirm the precise build-up and whether it suits the existing wall and project requirements.

This is selection guidance, not a guarantee of acoustic performance or Building Regulations Part E compliance. Check the complete existing construction, flanking paths, fire requirements and current product fitting instructions before specifying a system.

HOW IT WORKS

How do acoustic wall systems reduce noise?

Wall soundproofing combines cavity absorption, resilient separation and acoustic mass to reduce airborne sound transfer. A system must also address joints, sockets and flanking paths; treating a single surface cannot eliminate every transmission route.

Important: A deeper wall construction is not automatically better in every property; the original wall and installation details matter.

01

Absorb

Acoustic mineral wool helps control resonance in an internal cavity. On its own it is not a complete wall-soundproofing solution.

02

Isolate

Clips, resilient bars or an independent frame reduce direct structural coupling. Perimeter and junction detailing must preserve that separation.

03

Add mass

Dense boards and acoustic membranes resist airborne sound. The benefit depends on layer sequence, airtight junctions and the existing wall.

BEFORE YOU CHOOSE

Three things to check before choosing a wall system

The best system depends on the existing wall, space available and sound you need to reduce.

Existing wall

Is the wall masonry or studwork? Can an independent frame be built, or must the lining be fixed closer to the existing surface?

Space and noise

Compare loss of room space with the level and type of noise you need to address. More depth is not a guarantee of a particular acoustic result.

Junction details

Check doors, sockets, ceilings, floors and other flanking paths. Appropriate sealing and separation are part of the complete system.

Read the acoustic wall systems buying guide More detail on the existing structure, noise types, installation and building regulations

1. Identify the wall and noise problem

Is it a masonry or lightweight separating wall? Describe the noise, its source and whether there are potential side routes through floors, ceilings or adjoining walls.

2. Choose the lining arrangement

A compact clip-based lining preserves more room depth; an independent lining allows a larger void and reduces direct contact with the existing wall. Compare the published build-ups rather than relying on names alone.

3. Detail junctions and services

Plan perimeter seals, socket boxes, skirting details, door openings and other penetrations. Rigid bridges or unsealed gaps can undermine the isolation and airtightness.

4. Review standards and installation

Check any structural, fire and Part E requirements that apply to your project. Use the complete manufacturer or retailer installation instructions and seek a project-specific acoustic assessment if compliance must be demonstrated.

5. Calculate materials

Open the chosen system product and use its materials calculator, checking the final wall dimensions, openings, wastage, fixings and accessories.

Before ordering: System performance depends on the existing wall, perimeter junctions and complete installation. Do not rely on a single product to guarantee Part E compliance.

EXPERT SOUNDPROOFING ADVICE

Need help choosing an acoustic wall system?

Tell us about your existing wall, noise problem and available room space. Our team can help you compare suitable approaches and materials.

Existing wall: masonry or studwork?
Noise source: voices, music or other?
Available room depth and junction constraints?

Ask our soundproofing team Or call 01928 571 856

Acoustic Wall Systems