Hush Panel Premier 48 Acoustic Floor Board 2400 x 600 x 48mm
Secure payments
Product Information
Raise your floor level and reduce everyday noise in one step with Hush Panel Premier 48. Designed for projects where finished levels need to match, this acoustic floor board combines a moisture-resistant chipboard surface with a thick resilient layer to improve impact and airborne sound insulation.
Each 2400 x 600 x 48mm board covers 1.44m². Laid over a concrete or timber deck, Hush Panel Premier 48 gives a finished floor height of 48mm.
 |
Impact rating: 53 dB L’nT,w |
 |
Airborne rating: 58 dB DnT,w / 50 dB DnT,w + Ctr |
 |
Thickness: 48mm |
 |
Board size: 2400 x 600mm |
 |
Area: 1.44m² per board |
Build up floor height while cutting noise
Hush Panel Premier 48 combines 18mm high-density P5 moisture-resistant TG4 chipboard with a 30mm HushSlab 30 acoustic resilient layer factory-bonded to the underside. It offers excellent impact protection, helping reduce footsteps travelling through the floor.
The thick resilient layer also takes up minor undulations in the floor surface. It is a practical choice for matching floor levels during refurbishments and changes of use, as well as upgrading new floors.
Acoustic performance
Typical performance is 53 dB L’nT,w for impact sound, 58 dB DnT,w for airborne sound and 50 dB DnT,w + Ctr. Hush Panel Premier 48 helps tackle both footsteps and airborne noise such as voices and TV.
Hush Panel Premier 48 is used in floor systems designed to meet Building Regulations Part E in England & Wales, Section 5 in Scotland and Part G in Northern Ireland. It is Robust Details FFT5 compliant for floor structures EFC-1, EFC-2 and EFS-1.
Installation and floor finishes
Lay Hush Panel Premier 48 over existing or new concrete or timber floors. Its bonded layers install together in a single, time-saving operation.
- Glue all tongue-and-groove joints with Hush Bond panel adhesive.
- Isolate the perimeter with Hush Seal 20.
- For a tiled finish, use Permalayer and a flexible tile adhesive.
How many boards do I need?
Divide your room area in m² by 1.44, add 10% for cuts, then round up to a whole board.
For example, a 20m² room needs 20 ÷ 1.44 x 1.10 = 15.28, rounded up to 16 boards.
You’ll also need
Plan adhesive from the floor area and perimeter isolation from the room edge measurements.
For example, a 5m × 4m room is 20m² with an 18m perimeter: allow 1 adhesive bottle and 2 lengths of Hush Seal 20. Allow extra for cuts, joints and awkward edges.
-
Estimate one 1L bottle per 20m² for tongue-and-groove joints; round up.
View details Add 1 bottle -
Divide the room perimeter in metres by 10 and round up.
View details Add 1 10m length
Add each extra you need, then adjust its quantity in your basket.
For help with the right quantity for your project, call our technical team on 01928 571 856 or email hello@soundinsulationstore.co.uk
