Next day delivery - order before 11am

5/5 Rating

Flexible finance

Ask for experts advice
Flanking Strip for acoustic products
Flanking Strip for acoustic products

dB Part E System 4 (Concrete Floor)

The dB Part E Systems are our tried and tested acoustic floor and ceiling build ups that are tried and tested to achieve and exceed Part E of the Building Regulations. Every system also has a wealth of test data proving the performance. To find this look in the Technical Data section below where a number of test reports can be downloaded and compared.

The dB Part E System 4 is for a new build property with a concrete floor structure. This is your typical new build concrete specification for UK buildings.

All installations subject to acoustic testing to satisfy Part E of the Building Regulations, contact Floorscan for details. Ceiling will need to ensure adequate fire resistant separation to satisfy Part B of the Building Regulations. Seek specialist advice and obtain approval from the Building Control Officer to ensure your ceiling detail satisfies your fire requirement.

Take a look at the test data in the technical downloads below.

Technical Drawing

Ā 

Technical Data & Installation Instructions


Case Study & Sound Test Reports:

See real life results from our case study on the dB Part E System being installed and the test data here -Ā 

Case Study & Sound Test Report

Ā 

https://www.soundinsulationstore.co.uk/blogs/news/acoustic-underscreed-a-case-study

Calculate your requirements

The calculator works out your exact mĀ² coverage. We suggest you allow for wastage in your mĀ² calculation.

0mĀ²

will be covered

Ā£0.00

Inc.VAT

Total price: Ā£0.00

Key Benefits
  • High level of impact and airborne noise reduction
  • Isolation, Insulation and Mass.
  • Suited for concrete subfloors and under screed.

Click the Link Below to reveal Test Data:

Case Study

Installation instructions

Click the Link Below for:

Technical Data & Installation Instructions

.

Important Information


Sound Insulation Store are specialists in acoustics and sound insulation. All guidance, system information and predicted performance figures are provided for general assistance only.

It is the customerā€™s responsibilityĀ to ensure that the existing structure is suitable and compatible with any proposed sound insulation system. Where required, customers must seek advice from a structural engineer, building control, or another appropriately qualified professional.

Customers must also confirm whether their project requires specific fire resistance, structural, or regulatory complianceĀ measures. Any fire, structural, or regulatory approval must be obtained independently from a competent specialist.

Sound Insulation Store has worked with NCPL to produce Insul prediction graphsĀ and holds site test dataĀ on our Part E systems. These figures are intended as guidance only.

Actual on-site performance will vary depending on the condition and construction of the existing building, flanking transmission routes,installation quality, and any unforeseen site variables.

No performance level can be guaranteed unless independently tested on site after installation.

dB Part E System 4 (Concrete Floor)

dB Part E System 4 (Concrete Floor)

Regular price Ā£0.00
Sale price Ā£0.00 Regular price
Unit price