Acoustilay MDF 6mm is desgined to be installed over the Acoustilay floor products to leave a solid substrate for installation of Laminate, Vinyl, Carpet Tile, and Bonded Carpet Floor Finishes. For Luxury Vinyl Tile (LVT) please speak to the floor manufacturer who will advice on their desired specification & tolerances.
The MDF is tongue & groove so there is not need for screws or nails to penetrate the acoustic floor below. The Acoustilay MDF boards should be bonded to the Acoustilay using the appropriate Acoustilay Adhesive and to each other using a PVA Adhesive on the tongue & groove joint, and any such joint should be a minimum of 50mm away from any Acoustilay joint. An isolation gap of 5-10mm should be left between the wall and the Acoustilay MDF to avoid sound transmission flanking into the structure. The isolation gap should be filled with Acoustic Sealant AC50.
Acoustilay MDF 6mm is 5kg per sheet.
Moisture Resistant MDF
Please consult the Acoustilay Datasheet for full installation instructions.
Dimensions: 1200mm x 1200mm x 6mm
To be used with our Acoustilay Acrylic Adhesive and dB Bond PVA.
The team at SIS say: This product has been designed to allow all floor finishes to be installed over the top of the Acoustilay range. Allow for wastage when ordering.
For Luxury Vinyl Tile (LVT) please speak to the floor manufacturer who will advice on their desired specification & tolerances.
If you room is 4m x 3m = 12m² / 1.44 = 8.333 so rounded up = 9 Sheets + 1no. for wastage, so 10no. in total.
For assistance on the correct quantity to order please contact our technical team on 01928 571 856 or email us on firstname.lastname@example.org