Many in stock
Dimension Maxideck edging strip (for use if installing skirting on to maxideck) 32mm x 5.6m
Where the maxideck meets the skirting boards at the perimeter walls, the overlap on the top board of the maxideck should be removed. in order to isolate the boards from the skirting, and allow for any expansion that might occur, the self adhesive 25mm maxideck edging strip should be applied directly to the trimmed edge of the board.this enables the installer to locate the boards easily, leaving a 10mm expansion gap,which the sound seal will expand to fill.
If fitting skirting boards after the Maxideck has been installed, you must use the wider 32mm 5/26 Maxideck Edging Strip on the boards that meet the perimeter walls. The excess Edging Strip expands over the top of the Maxideck and provides the installer with a resilient base to sit the skirting on